Apraksts
Нет перевода
(EN) The MarCheck plus control electronics is designed only for operating MarShaft MAN instruments (sizes 400 mm to 2400 mm) using MarWin EasyShaft MAN measuring and evaluation software.
Uzdot jautājumuTechnical data
|
Grating constant
|
option; 2 µm; 4 µm; 10 µm; 20 µm; 40 µm
|
|---|---|
|
Interface data
|
1x RS 232; 1x USB 2.0 type A, 1x USB 2.0 type B
|
|
Incremental inputs
|
T1; T2; T3 (sin/cos 1 Vss) 15-pin D-Sub
|
|
Max. permissible travel speed
|
0.2 m/s at G = 2 µm
0.4 m/s at G = 4 µm 1 m/s at G = 10 µm 2 m/s at G = 20 µm with MarShaft MAN 4 m/s at G = 40 µm |
|
Input signal – cutoff frequency
|
<100 kHz with sin/cos 1 Vss
|
|
Standard languages
|
German; English; French
Other languages can be installed from an external PC via the USB interface |
|
Measuring units
|
mm/inches switchable in menu
|
|
Frequency check response threshold
|
100 kHz
|
|
Resolution per measuring channel can be independently set
|
0.0001 mm; 0.001 mm; 0.01 mm
0.00001 inch; 0.0001 inch; 0.001 inch 0.001° decimal; ° min, sec |
